POLYCURE DURAPOL 1013 Super Satin 45% 10L

DURAPOL® 1013 Super Satin is a premium single-pack, moisture-curing polyurethane floor finish designed for interior timber, parquetry, and cork flooring. It delivers a highly durable, abrasion-resistant surface with a refined satin sheen, making it ideal as the final coat in professional flooring systems.

Formulated for long-term performance, DURAPOL® 1013 enhances the natural beauty of timber while providing excellent protection against wear and daily traffic. Its smooth flow and levelling characteristics ensure a consistent, high-quality finish that is easy to maintain.

This product is intended for interior use only and must be used as the final coat within a compatible moisture-curing system.

Features & Benefits

• Single-pack moisture-curing polyurethane technology
• Highly abrasion resistant and extremely durable
• Attractive satin finish (45% sheen)
• Designed for use as a final coat only
• Excellent flow and levelling for a smooth finish
• Enhances natural timber colour and grain
• Easy maintenance and long-lasting performance
• Suitable for timber, particleboard, and cork flooring

System Compatibility

DURAPOL® 1013 Super Satin must be used as the final coat in a compatible system, such as:

• FASTASEAL® 3030, 3535, or 3540
• POLYTHANE® 2043 A/B
• DURAPOL® 1045 Super Gloss

Suitable Substrates

• Interior timber flooring
• Parquetry flooring
• Particleboard flooring
• Cork flooring

Technical Information

• Product Type: Single-pack moisture-curing polyurethane
• Finish: Super Satin (45% sheen)
• Colour: Clear
• Build: Medium
• Sandability: Excellent
• Levelling & Flow: Excellent
• Coverage: 10–20m² per litre (depending on substrate porosity and application method)
• Dry Time:
  • Hard dry: Overnight
  • Full cure: 5–7 days
• Clean Up: Polycure Super Cleaning Solvent
• Packaging: 10L

Surface Preparation

Proper preparation is essential for achieving the best results.

Fill all nail holes and surface imperfections with a suitable water-based timber putty and allow to dry completely.

Sand uncoated timber floors using 120–150 grit sandpaper or screen-back abrasive on a flexible pad to achieve a uniformly dull, defect-free surface free from scratches, nibs, or fur. Vacuum thoroughly and take care to avoid scratching the prepared surface.

Mixing

Stir thoroughly before use to ensure uniform consistency.

Application Tools

• 6mm nap roller or applicator
• High-quality brush for cutting in edges and skirting boards

Application

Timber Floor System:

1. Apply a liberal first coat of DURAPOL® 1044 or 1045, Titan Gloss, POLYTHANE® 2043, or FASTASEAL® 3030, 3535, or 3540 using a 6mm mohair roller and brush for edges.
2. If using FASTASEAL®, allow to dry for approximately 45 minutes before sanding. For other systems, allow to dry overnight (minimum 8 hours, up to 24 hours).
3. Apply a second coat of DURAPOL® 1044 or 1045 Gloss, Titan Gloss, or POLYTHANE® 2043. Allow to dry overnight (8–24 hours).
4. Sand thoroughly using 150–180 grit sandpaper or screen-back abrasive to remove nibs, fluff, and surface imperfections. Vacuum all dust.
5. Apply the final coat of DURAPOL® 1013 Super Satin to achieve the desired finish.

Final Finish

Provides a durable, elegant satin surface with excellent resistance to abrasion and long-term wear, while enhancing the natural appearance of timber floors.