- BBQ fats and grease
- Bird and pet droppings
- Old decking oil
- Tannins and mill glaze
- Food and beverage spills
- Organic residues, such as dirt, mould stains, plant matter, leaf marks, sap stains, etc
- Organic-based motor oil
- Preps New Timber – Eliminates mill glaze and tannins from freshly milled wood.
- Strips Old Oil Coatings – Effectively removes worn or aged oil finishes.
- Boosts Coating Performance – Helps oils and stains penetrate evenly for better protection and finish.
- Ideal for Exterior Use – Designed for decks, cladding, screens, outdoor furniture, and more.
- Eco-Friendly Formula – Biodegradable and safe when used as directed.
Where to use:
Use Equisol Prime on new exterior timber including decking, pergolas, garden furniture, fences, gates, weather boards, trims and soffits. Not suitable for stripping paint or polyurethane film coatings from timber.
Sizes Available: 1L, 4L, 20L
Mix Ratio: 1 part concentrate to 4 parts water
Coverage: 4m2 per litre when diluted
Clean up: Water
Preparation
Sweep deck and wash down with water. Protect areas not to be cleaned. Mask painted areas, as Prime will damage paint. May also be corrosive to metals. If mould is present use Equisol Null before using Equisol Prime.
Application
Wear protective gloves and goggles. Mix ONE part Equisol Prime with FOUR parts water in a clean plastic container and stir thoroughly. Apply mixture to timber with stiff bristle brush and scrub lightly to ensure good penetration. Leave for about 30 mins, taking care to keep timber wet. Do not allow surface to dry. Rinse mixture off thoroughly with a high pressure water cleaner.
Safety Directions
Harmful if swallowed and in contact with skin.
Causes allergic skin reaction. Causes serious eye irritation. Toxic to aquatic life.
Avoid breathing mist, vapours or spray. Wear protective clothing, gloves, eye/face protection and suitable respirator as required. Wash hands, face and all exposed skin thoroughly after handling. Do not eat, drink or smoke when using this product. Contaminated clothing should not be allowed out of the workplace, and should be washed before re-use. Store in a closed container, in a well ventilated place and away from oxidising agents and foodstuffs. Do not empty into drains.
FIRST AID: If poisoning occurs, contact a doctor or Poisons Information Centre (Phone Australia 13 11 26). If medical advice is needed, have product container or label at hand.
SWALLOWED: If swallowed, rinse mouth. Do NOT induce vomiting. Give a glass of water. Immediately call a POISON CENTRE or doctor.
EYE: Hold eyes open, flush with running water for at least 15 minutes and see a doctor.
SKIN: If skin or hair contact occurs, immediately remove any contaminated clothing and wash skin and hair thoroughly with running water. If swelling, redness, blistering or irritation occurs seek medical assistance.
INHALED: Remove from contaminated area – avoid becoming a casualty. Allow patient most comfortable position and keep warm. Apply artificial respiration if not breathing. Seek medical advice.
FOR FIRE: If involved in fire use water fog, foam or dry agents. Avoid breathing product of combustion.
FOR SPILLS: Clear area of all unprotected personnel. Slippery when spilt. Wear protective equipment. Absorb with sand or soil. Collect and seal in properly labeled drums. Dispose of contents/containers in accordance with local regulations.
DISPOSAL: Do NOT pour leftover product down the drain. Keep unwanted product in sealed containers for disposal via chemical waste collections.
Project Advice
Xcoat Project Advice
Instructional videos for making your project run smoothly.
Experience the convenience of swift order fulfillment with our top-notch Shipping services.