Fiddes Outdoor Furniture Oil

Preparation:

• Ensure all surfaces are clean, dry and free from any previous finish.
• Remove any fungal growth, dirt or moss on old timber prior to application.
• Sand the substrate with a medium 120 grade sanding paper or 120 grade sanding disk removing all traces of dust.

Application:

• Apply in dry conditions and always test on a small area prior to initial application.
• No primer required
• Minimum 3 coats recommended
• Formulated for direct application and does not require thinning
• Stir contents thoroughly before and during use
• Apply using a good quality bristly or synthetic brush and apply evenly and thoroughly following the direction of the grain
• Leave to dry 4-6 hours or overnight with good ventilation
• Sand lightly with fine 320 grade sandpaper if required
• Clean applicators with White Spirits

Re-Application:

• To renovate previous application, lightly sand area with 150 grade sandpaper and re-apply
  
• Refresh annually

Coverage: Approximately 20sqm per litre depending on substrate