WOCA Pre-Colour White is a water-based wood stain designed for unfinished and freshly sanded interior timber surfaces. Ideal for floors, stairs, furniture, panels, and other wooden surfaces, it enhances the natural grain while adding a beautiful white colour tone to the wood.
The stain penetrates the wood to create a rich, even appearance that highlights the timber's natural character. For lasting protection, the treated surface must be finished with a WOCA oil, as Pre-Colour provides colour only and does not protect the wood.
Features & Benefits:
- Water-based stain for interior wood surfaces
- Enhances and highlights the natural wood grain
- Creates an attractive white-toned finish
- Suitable for floors, stairs, furniture, panels, and other timber surfaces
- Compatible with all WOCA oils
- Easy water clean-up
- Ideal for unfinished and sanded wood
Important
Pre-Colour must be finished with a suitable WOCA oil according to the product instructions. It is designed to colour the wood and does not provide surface protection when used alone.
Technical Data:
- Colour: White, Black
- VOC Content: 145 g/L (Maximum VOC content A/l (WB): 200 g/L)
- Density: 1.10–1.20 g/ml
- Coverage: 8–10 m²/L
- Application Temperature: +15°C to +25°C (approx. 50% relative humidity)
- Shelf Life: 3 years
- Packaging Size: 2.5L
Worksteps
Product, room and floor temperature must be between 15-25°C. Wood humidity must not exceed 12%. Ensure good ventilation during application and when drying. The wood must be newly sanded, use grit 100-120 for the final sanding. Vacuum thoroughly. Clean the wood with WOCA Intensive Wood Cleaner and leave it to dry for at least 8 hours before applying the stain.
Always remember to test on a less visible spot to check the compatibility of the surface with the product.
- Thoroughly shake the container of Pre-Colour, both before and during use. Containers with different batch numbers should be mixed to avoid colour mismatch.
- Apply an even coat of undiluted stain along the wood grain with WOCA Applicator. A more uniform colour is obtained if the wet stain is polished into the wood using a polishing machine and a beige pad. Use at least 1 L of Pre-Colour per 8-10 m²/L. On vertically mounted wood, apply from top to bottom. Leave the surface to dry for 6-12 hours at 20°C.
- Sand with a green pad to obtain a smooth surface and vacuum thoroughly.
- The surface must be finished using one of WOCA’s oils, following the product instructions.
The surface must be finished using one of WOCA’s oils, following the product instructions. Pre-Colour cannot be used alone as it only provides colour to the wood, and not protection.
Experience the convenience of swift order fulfillment with our top-notch Shipping services.