Bring your dream to life with Feast Watson Liming White. With this oil-based white wash stain, you can choose from a beautiful, neat white finish or venture out to something more colourful with a soft, pastel tone.
For use on all interior timber furniture and accessories. Ideal for small craft or decoupage projects, and highly recommended for interior timber benches and table tops. Suitable as an embedding or casting medium.
Specification:
- Where to use: All interior timber furniture and accessories. Ideal for small craft or decoupage projects, and highly recommended for interior timber benches and table tops. Suitable as an embedding or casting medium,
- Finish: Stain
- Coverage rate: 12m² per litre
- Number of coats (Bare Timber): 1
- Recoat time: Wipe off 1- 5 minutes after application. Add top coat after 8 hours
- Dry time: 24 hours
- Clean up: Mineral Turpentine. Soak application cloths in water prior to disposal.
Note: Liming White should be top coated with Feast Watson Clear Varnish, Scandinavian Oil, Floorseal Oil or Floorclear.
Preparation
How to prepare your timber for Feast Watson Liming White Stain:
Okay, let's achieve these colour dreams!
New Timber How to prepare New Timber:
- Sand to a smooth surface and remove all sanding dust before coating.
- To achieve a super-smooth finish, or if the timber grain is open or coarse, apply a coat of Feast Watson Sanding Sealer and sand back as per the directions.
Note: For soft porous timbers such as Pine, Meranti and Cedar, seal with Feast Watson Timber Primer to ensure even absorption into the timber.
Previously Coated Timber How to prepare Previously Coated Timber:
- If your timber has been previously coated, you need to sand back to bare timber to ensure the best results.
- Remember to remove all sanding dust before coating!
Application
How to apply Feast Watson Liming White Stain:
Before you get started:
- Ensure the product has been thoroughly stirred through with a flat blade stirrer. Be careful not to introduce any bubbles!
- Make sure you love your colour! Using an off-cut, test the colour to ensure you are happy with your choice. Note that the dwell time before wiping any excess, and the finishing clear coat will impact the final colour.
How to limewash your timber:
Let's do this:
- In the direction of the grain, apply Liming White with a brush or Feast Watson Floor Finish Applicator.
- Using a soft, clean cloth, wipe off excess when your desired colour has been achieved (1-5 minutes).
- Leave to dry for 8 hours.
- Looking for a stronger colour? That's okay! Stronger colours can be developed with further coats of Liming White. Just follow the above procedure to achieve your wonderful colour.
All done? Great! Now onto the protective coat. But remember, oil based top coats may cause the surface to yellow over time.
Top Coating:
- Ensure Liming White is completely dry before applying.
- For interior floors, apply Feast Watson Timber Floor Oil, Feast Watson Timber Floor Wax or Feast Watson Timber Floor Varnish as per the label instructions.
- For all other interior timber (not floors) apply three coats of Feast Watson Clear Varnish as per label directions.
Colour Tinting:
Add up to 5% Prooftint to Liming White to create pastel tones. Add 50ml of Prooftint to a 1L can of Liming White. Apply the tinted mixture as per the above procedure.
Maintenance
How to maintain your timber after using Liming White Stain:
Let's maintain your wonderful colour...
Floors:
- Once Liming White has been top coated, use Feast Watson Floorclean to clean your floor.
- Use Feast Watson Mastertouch Polish to rejuvenate the surface and Feast Watson Floorshine to rejuvenate and extend the life of tired.
Furniture:
- To rejuvenate your interior furniture, polish sealed surfaces with Feast Watson Mastertouch Polish or buff with Feast Watson Fine Buffing Oil.
Experience the convenience of swift order fulfillment with our top-notch Shipping services.