Transform Your Floors with Durable, Opaque Colour
Give your floors a fresh new look with Feast Watson Floor Paint. Featuring a highly opaque, water-based formula, this durable floor paint provides excellent coverage and a stylish satin finish while protecting against everyday wear and tear. Ideal for updating existing floors without the cost and disruption of replacement, it delivers long-lasting colour and performance in high-traffic areas.
Product Specifications:
- Suitable For: New and existing interior timber, cork, and parquetry floors
- Finish: Satin
- Coverage: Up to 10 m² per litre
- Number of Coats: Bare timber – 3 coats
- Recoat Time: 2 hours
- Dry Time: 20 minutes
- Clean Up: Water
- Size: 4L
Preparation
How to prepare your timber for Timber Floor Paint:
Here we go!
New Timber/Cork How to prepare new or bare timber/cork:
- Punch exposed nails below the surface. If you have any holes and imperfections, they should be filled with timber putty.
- Sand timber to an even, smooth surface. Remember to vacuum and wipe to remove any sanding dust.
Cork: Prepare uncoated cork tiles in accordance with the supplier's recommendation.
Timber: For best results, seal uncoated or tannin rich timber with Feast Watson Proofseal and allow to dry thoroughly before applying Timber Floor Paint.
Previously Coated Timber How to prepare previously coated timber:
- Sand back your coated surface back to bare timber.
- Remember to remove all sanding dust before coating!
Application
How to apply Feast Watson Timber Floor Paint:
Let's give your space that new feel...
Before getting started, make sure your surface is clean from any grease, oil, dirt and dust! We want to achieve the best results from the start.
- Make sure your surface is clean from any grease, oil, dirt and dust. We need a blank canvas before we can make the magic happen!
- Without introducing any bubbles, use a flat blade stirrer and thoroughly stir your product both before and during application.
- Using the Feast Watson Floor Finish Applicator, brush or a short nap mohair roller, apply your first coat. Work along 3-4 floorboards at a time, maintaining a wet edge to prevent lap marks and lay off in the direction of the grain. And remember, avoid introducing any bubbles!
- After your first coat is thoroughly dry, give your second coat a go! If you notice any grain raising, a light sand may be required.
- Need a longer wearing finish? Apply a third coat.
- If a gloss finish is desired, apply a topcoat with a suitable gloss water based floor coating over your final coat of Timber Floor Paint.
Maintenance
How to maintain your floor after using Feast Watson Timber Floor Paint:
Let's take care of your new colour...
- Clean regularly using Feast Watson Floor Clean.
- Keep an eye on your floor for signs of colour loss or surface defects.
- When floor requires an additional coat of Timber Floor Paint, apply as per the application instructions for previously coated surfaces.
Experience the convenience of swift order fulfillment with our top-notch Shipping services.