Create a bright, open look with beautifully whitewashed floorboards using Feast Watson Timber Floor Stain & Varnish Liming White. This water-based, one-step solution delivers a fresh, modern finish while providing durable protection for interior timber floors.
Combining a traditional whitewash stain with a clear polyurethane coating, it offers a non-yellowing finish and allows you to build your desired level of whiteness and opacity. Ideal for achieving a clean, sophisticated look without compromising durability.
Suitable for application on bare timber and cork flooring. For previously coated timber, sanding back to bare wood is required before application.
Specifications:
-
Coverage: 10 m² per litre
-
Coats (bare timber): 3
-
Dry time: 20 minutes
-
Light foot traffic: 24 hours
-
Normal traffic: 72 hours
-
Full cure: 7+ days
- Clean-up: Water
Where to Use:
- Bare timber floors
- Cork flooring
- Previously coated timber (must be sanded back to bare wood)
Preparation
How to prepare Feast Watson Stain and Varnish:
Before you get coating... Let's prep!
New Timber How to prepare new timber:
- Allow new timber to adapt and adjust to the climate in its final position for 4-6 weeks.
- Prepare exterior timber for coating with Feast Watson Woodclean. Sand to a smooth surface.
- Remember to remove all sanding dust before coating!
Weathered Timber How to prepare weathered timber:
- Prepare your exterior weathered or grey timber by cleaning thoroughly with Feast Watson Woodclean.
- Sand to a smooth surface and remove all sanding dust before coating.
Previously Coated Timber How to prepare previously coated timber:
- Previously coated surfaces need to be taken back to bare timber by sanding timber to a smooth surface.
- Remember to remove all sanding dust before coating!
Application
How to apply Feast Watson Stain and Varnish Liming White:
Here we go…
But first, check you're ready to go:
- Make sure you love your colour! Using an off-cut or on a inconspicuous area, test the colour to ensure you are happy with your choice.
- Make sure the Stain and Varnish Liming White is thoroughly stirred through before starting (and during!). Avoid introducing any bubbles!
Let's do this:
- Apply Stain & Varnish Liming White using a brush or roller.
If applying by roller, use a short nap (5mm) mohair roller. Ensure edges and end grain are fully coated.
How to apply Stain and Varnish Liming White to new timber:
- If applying by spray, three coats are required.
- Three coats are required, if you have achieved your colour after one or two coats, Just complete the following coats with a water based interior clear coating as additional coats of Stain & Varnish Liming White will intensify colour.
- Provide 2 hours drying time between coats.
- Remember to sand lightly between coats with a fine sandpaper to get the best results.
If applying over a previous varnish coating, two coats will be sufficient.
Maintenance
How to maintain my timber with Feast Watson Stain and Varnish Liming White:
Follow these easy steps:
- Keep an eye on the surface for any signs of colour loss or surface defects.
- When required, lightly sand the surface, and remember to remove all dust.
- Recoat with an additional coat of Clear Varnish as per application instructions.
Experience the convenience of swift order fulfillment with our top-notch Shipping services.