POLYCURE DURAPOL 1012 Semi Gloss 10L 60%

DURAPOL® 1012 Semi Gloss is a premium single-pack, moisture-curing polyurethane floor finish designed for interior timber, parquetry, and cork flooring. It forms a highly durable, abrasion-resistant surface with a refined semi-gloss sheen, making it ideal as a final coat in professional flooring systems.

This coating is engineered to deliver long-lasting protection while enhancing the natural appearance and warmth of interior timber floors. It provides excellent flow and levelling for a smooth, even finish and is easy to maintain over time.

DURAPOL® 1012 is intended for interior use only and is suitable for timber, particleboard, and cork flooring systems.

Features & Benefits:

• Single-pack moisture-curing polyurethane technology
• Highly abrasion resistant and extremely durable
• Attractive semi-gloss (subdued gloss) finish
• Designed for use as a final coat only
• Excellent flow and levelling for a smooth finish
• Enhances natural timber colour and grain
• Easy maintenance and long-term performance
• Suitable for interior timber, particleboard, and cork flooring

System Compatibility:

DURAPOL® 1012 Semi Gloss must be used as the final coat within a compatible moisture-curing system, such as:

• FASTASEAL® 3030
• POLYTHANE® 2043 A/B
• DURAPOL® 1045 Super Gloss

Suitable Substrates:

• Interior timber flooring
• Parquetry flooring
• Particleboard flooring
• Cork flooring

Technical Information:

• Product Type: Single-pack moisture-curing polyurethane
• Finish: Semi Gloss (60% sheen)
• Colour: Clear
• Abrasion Resistance: Excellent
• Durability: Extremely high
• Levelling & Flow: Excellent
• Coverage: 10–12m² per litre (depending on substrate porosity and application method)
• Dry Time:
  • Recoat: Refer to system product datasheet (typically 8–24 hours depending on base coat)
  • Full cure: Refer to Technical Data Sheet
• Clean Up: Suitable solvent or cleaner as specified in system datasheet

Surface Preparation:

Proper preparation is essential for optimal performance.

Fill all nail holes and surface imperfections with a suitable water-based timber putty and allow to dry completely.

Sand uncoated timber floors using 120–150 grit sandpaper or screen-back abrasive on a flexible pad to achieve a uniformly dull, defect-free surface free from scratches, nibs, or fur. Vacuum thoroughly and take care to avoid scratching the prepared surface.

Mixing:

Stir thoroughly before use to ensure uniform consistency.

Application Tools:

• 6mm nap roller or applicator
• High-quality brush for cutting in edges and skirting boards

Application:

Timber Floor System:

1. Apply a liberal first coat using DURAPOL® 1044 or 1045, Titan Gloss, POLYTHANE® 2043, or FASTASEAL® 3030, 3535, or 3540 as the base/sealer coat. Use a 6mm mohair roller and brush for edges.
2. If using FASTASEAL®, allow to dry for approximately 45 minutes before sanding. For other systems, allow to dry overnight (minimum 8 hours, up to 24 hours).
3. Apply a second coat of DURAPOL® 1044 or 1045 Gloss, Titan Gloss, or POLYTHANE® 2043. Allow to dry overnight (8–24 hours).
4. Sand thoroughly using 150–180 grit sandpaper or screen-back abrasive to remove nibs, fluff, and surface imperfections. Vacuum all dust.
5. Apply the final coat of DURAPOL® 1012 Semi Gloss to achieve the desired finish.

Final Finish:

Provides a durable, professional semi-gloss surface with enhanced timber appearance and long-term protection.