Fiddes Tinted Hard Wax Oil Colours 1L

Key benefits of Fiddes Hard Wax Oil:

• Now available – Dead Matt Ultra Raw
• Clear available in 4 Sheen levels – Matt, Silk, Satin & Gloss
• Pre-Tinted range in 12 colours
• Customisable – Tinted colours can be mixed together or with the clear
• Suitable for all internal timber e.g., floors, kitchen bench tops, furniture, doors & joinery
• Suitable for any porous surface e.g., Concrete, cork, stone etc.
• Quick Drying (4-6 hours in correct conditions – fully cured in 7 days)
• Highly Durable – More durable than buffed in HWO’s and no need to add additional hardeners
• Replenishable – if maintained correctly, no need to re-sand before applying maintenance coats
• Easy to Maintain- Simply use Fiddes Wood Floor Cleaner as required
• Suitable for application onto children’s toys – EN 71 – Toy Safety Test
• Water Resistant: Tested in accordance with BS 3900 G5
• Resistant to wear: Tested in accordance with BS 3900 EI5
• Slip Resistant rating of R11 out of the tin – no need to add anything
• Easy to use – clear HWO simply rolled on using a short nap roller (see application instructions and YouTube Videos for further details)
• No need for special Maintenance Oils
• Excellent coverage rate – approx. 20 – 24sqm per litre
• Does not react with silicone or putty
• Non yellowing – UV stable
• Anti-Static

Preparation

Ensure all surfaces are clean, dry and free from previous finish. Minor gaps and holes can be filled with Fiddes Filler Gel if required. Sand the substrate with a fine 120-150 grade sandpaper. Ensure the surface is clean and remove all traces of dust prior to application.

Application

Ensure all areas to be coated are extremely well ventilated during and after application and always test on a small area prior to use. No sealer or primer is required. Stir contents thoroughly before and during use. Maximum 2 coats recommended. Clean applicators with White Spirits.

Floors

Apply with a brush, trowel or a floor applicator and buff in with a TAN or BEIGE floor pad using a slow speed buffing machine (175 RPM) whilst ragging edges working the product across the floor. Once dry, apply a coat of clear Hard Wax Oil using a short nap microfibre roller. Alternatively, to achieve a similar look without using a buffing machine mix 10% Tinted HWO with clear HWO and roll on using a short nap microfibre roller.

You can also roll the Tinted HWO straight using a short nap microfibre roller being extremely careful not to overlap and to leave roller stop marks.

Furniture

Brush or roll the Tinted Hard Wax Oil and then using a rag, buff into the surface ensuring the entire surface has been covered. Once dry, apply a coat of clear Hard Wax Oil using a short nap microfibre roller. Alternatively, see above instructions to mix Tinted with Clear Hard Wax Oil.

Additional notes

*When applied using the above methods the Tinted Hard Wax Oil is more of a transparent tint. If the project requires a deeper colour we recommend using a direct stain such as Fiddes Nitro or Light Fast Water Stain before applying a Clear Hard Wax Oil as per instructions.

*Always do a test patch first and ensure the substrate is prepared in the same process as the project will be completed.

*Please refer to the Hard Wax Oil Application Sheet for additional application information.

Hard Wax Oil is a blend of natural oils and waxes offering exceptional durability and resistance for internal timber surfaces and flooring. Hard Wax Oil is easily maintained and rejuvenated when required. If maintained correctly, no future sanding is needed as it is a replenishable coating system designed to be easily spot repaired without leaving repair marks. The coating is quick drying, meaning any future maintenance coats can be applied and dry within a few hours. The coating will be fully cured in 7 days. Ongoing maintenance will depend on the treatment, so to extend the life of your coating it is important to care for it correctly.

Furniture & Joinery:

To care for your furniture and joinery we recommend regular cleaning with a microfibre cloth to remove dust and to use Fiddes aftercare products. Simply spray Fiddes Wood Surface Cleaner lightly and evenly, wiping clean with a lint free cloth.

Floors: 

To keep your floor looking its best, remove dirt and grit as it can cause fine scratching and wear on your floor. We recommend a broom or electrostatic mop or if using a vacuum cleaner please ensure the head will not scratch the coating. We also recommend only mopping as required using Fiddes Wood Floor Cleaner and to not oversaturate the timber. A microfibre spray mop is ideal. Please also ensure all mobile furniture such as chairs have adequate protection to eliminate any unnecessary premature wearing. Fiddes Australia offers a range of mobile furniture protectors available to purchase on our website.

Under no circumstance use bleach, ammonia or caustic based cleaners. It is also important to not use citrus or eucalyptus-based cleaning products. These products will strip or weaken the coating and could cause colour distortion and reduce the durability and stain resistance.

Fiddes Floor Reviver Kits are also available to assist in the removal of light surface marking. Please follow the instructions on the product when necessary.