• WOCA Maintenance Gel 200ml
  • WOCA Maintenance Gel 200ml
Woca Australia Pty Ltd

WOCA Maintenance Gel 200ml

$43.00
$43.00
Sale Sold out
Tax included. Shipping calculated at checkout.
Color:

Out of stock

Description

WOCA Maintenance Gel is a quick-drying maintenance oil designed for the care and protection of indoor oiled wooden surfaces and floors. It nourishes the timber while leaving a durable, water and dirt-repellent finish that enhances the natural beauty of the wood.

Ideal for furniture, kitchen benchtops, floors, and other indoor timber surfaces, Maintenance Gel is especially suitable for factory-oiled and UV-oiled floors, helping to refresh and revitalise worn surfaces while improving durability and appearance.

Features & Benefits:

  • Ideal for maintaining oiled indoor timber surfaces
  • Especially suitable for factory-oiled and UV-oiled floors
  • Enhances durability and resistance to water and dirt
  • Raises the sheen level from matte to satin
  • Quick-drying and easy to apply
  • Suitable for floors, furniture, kitchen benchtops, and more
  • Can be applied manually with a polish pad or by machine using a buffer

Recommended Cleaning & Maintenance:

Technical Data:

  • Coverage: Approx. 4–6 m² per tube3
  • Pack Size: 200ml
  • Colour: Natural and Extra White

Worksteps

It is important that both wood and oil are at a temperature of at least 59°F, and ideally about 68°F, and that air humidity is approx. 50 %. Make sure that the room is well-ventilated, for optimal evaporation and drying time.  Always remember to test on a less visible spot to check the compatibility of the surface with the product.

Maintenance Gel to re-oil a surface

  1. Thoroughly clean the surface with Intensive Wood Cleaner, mixed 1:20. Then wash with clean water. After cleaning, leave the surface to dry for at least 8-9 hours
  2. Sand the surface with 180 and vacuum clean the surface thoroughly.
  3. Apply an appropriate amount of gel to a Hand Scrubber Flex Kit White and distribute over the surface in a thin, even coat. Continue polishing until the wood seems saturated and the surface has a uniform appearance. It is recommended to work on small areas at a time, as the gel is quick-drying. For larger areas (floors larger than 40 sq.ft./L) it would be advantageous to use a polishing machine.
  4. Remove excess Maintenance Gel with dry, lint-free cotton cloths or pads until the surface no longer appears wet.
  5. If the wood does not seem fully saturated after 4-6 hours, repolish with less gel than the first treatment, but follow the same procedure.
  6. Wait 4-6 hours before using the surface. Avoid getting water or dirt on the wooden surface for the next 3 days .
Make sure to do a more thorough final polishing to remove all excess gel.

Maintenance Gel as a 2nd coat to raise oil sheen to satin
  1. Apply a few dime size dabs of Maintenance Gel to a white polishing pad attached to a floor polishing machine. Polish floor well until the wood seems saturated and the surface has a uniform appearance. It is recommended to work on small areas at a time, as the gel is quick-drying. 
  2. Remove excess Maintenance Gel with polishing cloths attached to a clean white pad until the surface no longer appears wet.
  3. Wait 4-6 hours before using the surface. Avoid getting water or dirt on the wooden surface for the next 3 days.
Make sure to do a more thorough final polishing to remove all excess gel.


 

Experience the convenience of swift order fulfillment with our top-notch Shipping services.