Lead time: 5-8 days
Bona DriFast® Stain is a premium-quality, oil-modified wood stain designed for interior hardwood floors. It penetrates, stains and seals bare timber while providing a rich, even colour with excellent workability. It is compatible with Bona finish systems, including waterborne finishes.
Available Size: 950ml and 3.8L
Key Features
- Premium oil-modified wood stain
- Penetrates, stains and seals bare wood
- Excellent colour blending and workability
- Open time allows sections to be blended with reduced risk of lap marks
- No bleed-back
- Easy to touch up after initial application
- Compatible with Bona finish systems, including waterborne finishes
- Coverage of approximately 19.6–24.5 m²/L
- Fast drying under ideal conditions
Recommended Use
- Interior hardwood floors
- Timber flooring
- Bare, properly prepared timber surfaces
- Residential and commercial interior flooring projects
Application
- Prepare and sand the timber surface according to standard floor-preparation procedures.
- Shake and stir the stain thoroughly before use. Do not thin.
- Apply with a brush, cut-in pad, clean cloth, or carpet disc used with a buffer, following the direction of the wood grain.
- Allow approximately 1–3 minutes penetration time.
- Remove excess stain by hand wiping or buffing with an absorbent, non-abrasive material.
- Allow the stain to dry thoroughly before applying the sealer or finish.
- Apply the chosen Bona finish system after the recommended drying period and within 48 hours of stain application.
Technical Data
-
Product: Bona DriFast® Stain
- Size: 3.8L / 1 Quart
- Type: Oil-modified wood stain
- Recommended Surface: Interior hardwood floors
- Coverage: 800–1,000 sq ft/gal (approx. 19.6–24.5 m²/L)
- Penetration Time: 1–3 minutes
- Drying Time: Minimum 2 hours for wood tones*
- Application Tools: Brush, cut-in pad, cloth or carpet disc
- Clean-up: Mineral spirits
- VOC: 550 g/L (US regulatory VOC)
- Shelf Life: 2 years unopened
- Storage: Store at room temperature; do not store above 38°C
* Drying time depends on colour, temperature, humidity and ventilation. Under ideal conditions of 16–27°C and 35–75% relative humidity, wood-tone colours require a minimum of approximately 2 hours.
Downloads
Experience the convenience of swift order fulfillment with our top-notch Shipping services.
