Lead time: 5-8 Days
Intergrain Endure Sport 2K is a premium, clear, two-component water-based polyurethane floor coating specifically designed for indoor timber sports courts, gymnasiums, recreational facilities, and large commercial timber floors.
Developed for Australian conditions, this high-performance coating provides excellent durability, wear resistance, and long-lasting protection in demanding, high-traffic environments.
Intergrain Endure Sport 2K meets FIBA requirements for wear and slip resistance, making it an ideal choice for professional indoor sporting facilities.
Note: This product is a two-component system consisting of Part A (14L) and Part B (1.4L). Both components must be mixed together at the specified ratio before application.
Features & Benefits
- High Durability: Designed for heavy foot traffic and demanding recreational environments.
- Water-Based Formula: Easy application with water clean-up.
- Two-Component Polyurethane: Provides a tough, durable and protective timber floor finish.
- FIBA Requirements: Meets wear and slip resistance requirements for indoor sports flooring.
- Clear Finish: Enhances the natural appearance of timber.
- Finish Options: Available in Matt and Gloss.
- Excellent Coverage: Approximately 8–10m² per litre.
- Fast Drying: Touch dry in approximately 1 hour and ready for recoating after 4 hours.
- Professional Application: Suitable for large-scale flooring projects using a microfibre roller or T-bar applicator.
Recommended Applications
- Indoor basketball and sports courts
- Gymnasiums and recreational centres
- School and community halls
- Indoor timber sporting facilities
- Large commercial timber floors
- High-traffic recreational areas
Technical Specifications
- Brand: Intergrain
- Product: Endure Sport 2K Part A
- Size: 14L
- Product Type: Two-component water-based polyurethane
- Finish: Matt / Gloss
- Colour: Clear
- Coverage: 8–10m²/L
- Recommended Coats: 2–3 coats
- Touch Dry: Approximately 1 hour
- Recoat Time: Approximately 4 hours
- Full Cure: 7 days
- Mixing Ratio: 10:1 (Part A : Part B)
- Pot Life: 3 hours after mixing
- Application Method: 10mm nap microfibre roller or T-bar applicator
- Clean Up: Water
- Application Temperature: 10°C–35°C
- Recommended Use: Interior timber sports courts, gymnasiums, recreational facilities, and commercial timber floors
USAGE INSTRUCTIONS
Surface Preparation
All surfaces must be clean, dry, free of wax, grease, dust and other contaminants. All nail-holes and cracks should be filled with a water based putty. Do not use linseed oil putty. Sand the floor, finishing with a 150-mesh screenback and vacuum thoroughly.
New timber
Apply 1 coat of Intergrain® Timberseal™ Water Based, Intergrain Timberseal Ultra or Intergrain Timberseal Alcohol Based following the instructions on the label. Lightly sand Timberseal Ultra with a worn 180 mesh screen if needed. If using Intergrain Timberseal Water Based or Intergrain Timberseal Alcohol Based, do not sand.
Apply two coats of Intergrain Endure® Sport™ 2 Pack using a 10mm microfibre roller or T-bar applicator. To improve adhesion and minimise grain raise, screen between topcoats with a worn 150 grit screen or 180 grit screen.
On porous timbers, apply 3 coats of Intergrain Endure Sport 2 Pack to ensure a uniform finish. Do not apply in temperatures above 35°C or below 10°C.
Recoating Wash the floor with Intergrain Floor Cleaner as per the label instructions. Sand to a dull finish with a 120 grit screen, vacuum thoroughly to remove dust, then wipe clean with a damp rag. To ensure adhesion, a test patch is recommended after the surface has been prepared.
Apply a small test area with Intergrain Endure Sport 2 Pack, allow to dry for 24 hours then firmly press a strip of sticky tape over the coating and rip off quickly. If the coating is removed, sand the full surface back to bare timber. If the coating is not removed, sand the test area back to a dull finish. If patches of previous coating have worn back to expose bare timber, the full floor must be sanded back to bare timber, and product applied as per ‘New Timber’ directions.
Apply 1–2 coats of Intergrain Endure Sport 2 Pack using a 10mm nap microfibre roller or T-bar applicator.
Application & Maintenance
Mixing
Allow the Intergrain Endure Sport Part A and Part B to cool down to room temperature before use, if required. Use a stirrer attached to a drill running at high speed to mix the Intergrain Endure Sport Part A. Stir for a minimum of 2 minutes until a uniform consistency is obtained. Mix Intergrain Endure Sport Part A and Part B in a ratio of 10:1. Add Intergrain Endure Sport Part B into Part A. Use a stirrer attached to a drill running at high speed. Stir for a minimum of 2 minutes until a uniform consistency is obtained. Do not mix by hand. Strain or filter product before use.
Pot life
3 hours. Intergrain Endure Sport 2 Pack must be used within 3 hours of mixing
Line Marking
Suggested line marking process:
- 1 coat Intergrain Timberseal
- 1 coat Intergrain Endure Sport 2K
- Sand with worn 150 screen or 180 screen.
- Remove all sanding dust.
- Line marking using Dulux Aquanamel Gloss, 2 coats Intergrain Endure Sport 2K.
- Sand between coats with worn 150 screen or 180 screen.
- Dulux Aquanamel Gloss is available in many colours. Choose the appropriate colours for the job. Some suitable colours for line marking include (but are not limited to) Signal Red Homebush Blue Homebush Green Homebush Gold (yellow) Vivid White Black
Maintenance
Clean floors regularly with Intergrain Floor Cleaner.
Cleaning frequency or schedule will be dependent on the floor usage. Follow instructions on the label of Intergrain Floor Cleaner.
The floor should be recoated with Intergrain Endure Sport 2 Pack at regular scheduled intervals to maintain a high performance coating surface and to prevent the coating from wearing through back to the timber substrate. Consult your flooring contractor.
Guarantee Details
Intergrain Endure 2 Pack is formulated to provide exceptional durability, wear resistance and long-lasting protection for interior timber floors when applied according to label instructions.
For detailed technical specifications and safety information, refer to the Technical Data Sheet and Safety Data Sheet.
Experience the convenience of swift order fulfillment with our top-notch Shipping services.