Water-based extra-matte dispersion care product. Gives extra-matte floors a new freshness and also enables the adaptation of semi-gloss to extra-matte surfaces. Signs of wear are concealed, dirt adhesion is reduced and subsequent cleaning is simplified.
Properties
- Preserves extra-matte appearance
- Suitable for adjusting the gloss level from semi-gloss to extra-matte
- Protective coating against light scratches and signs of wear
- Easy and safe application
- Conceals signs of wear and tear and enhances the appearance of floors
- Simplified cleaning due to reduced dirt adhesion
Range of use
Suitable care product for extra-matt and satin-finished hardwood floors, cork floor coverings, linoleum and PVC coverings.
Application
- Remove loose dirt and dust in advance with a vacuum, broom or mop, then damp-wipe the surface with LOBA CleanFix or Cleaner. Stubborn dirt or care product residue must be removed in advance by stripping the surface. Please note the relevant product's technical information when doing this.
- Shake the contents well.
- Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.
- Follow the care instructions according to the area of application.
- The application of a maintenance layer can change the properties and/or gloss level. Test certificates for slip resistance and suitability for sports floors must be observed.
Thinner / Mixing
The product is ready for use and must not be reduced!
Application tool / application rate
LOBA Wischwiesel 30-40 ml(g)/m2 = 25-35m2/l(kg) = 3-4 l/100 m2
Drying time
- Can be walked on after 1-2 hours.
- Full traffic capability and coverage after 12 hours.
Application:
Material is pre-applied to the flooring in sections and then applied in an even layer. Lay the applicator as flat as possible on the floor and do not lift. Do not use pressure. Start at one side of the room and then work from wall to wall towards the opposite side of the room with the exit door. A room should always be completely treated in one go. Never rework the floor while it is drying since this can lead to streak formation.
Stripping:
The product can be removed again by stripping with LOBA CareRemover. For details, see the product's technical information.
General guidelines
Cleaning of tools: Clean tools and equipment immediately with water.
Experience the convenience of swift order fulfillment with our top-notch Shipping services.