WOCA Maintenance Oil is designed for the regular care and maintenance of all oiled wood surfaces, particularly oiled timber floors. This high-quality oil refreshes and enhances the natural beauty of wood, restoring its warm appearance while providing additional protection against wear, stains, and moisture.
Easy to apply and economical in use, Maintenance Oil penetrates the wood surface to strengthen and protect while highlighting the natural grain and colour. Suitable for both manual and machine application, it is ideal for ongoing floor maintenance in residential and commercial environments.
Features & Benefits:
- Suitable for all oiled wood floors and surfaces
- Restores and enhances the natural appearance of timber
- Provides a durable, hard-wearing protective layer
- Increases resistance to stains, dirt, and everyday wear
- Highlights the natural grain and colour of the wood
- Easy application with minimal product waste
- Can be applied manually or by machine
- Certified by IBR
Technical Specifications:
- VOC Content: 130 g/L (Max. VOC content A/f (SB): 700 g/L)
- Density: 0.85–0.90 g/ml
- Coverage: 30–40 m²/L
- Application Temperature: +15°C to +30°C (approx. 50% relative humidity)
- Colour: Natural, White
- Shelf Life: 3 years
- Available Sizes: 750ml, 2.5L
Worksteps
Always remember to test on a less visible spot to check the compatibility of the surface with the product.
- Clean the floor with 125 ml Intensive Wood Cleaner mixed into 2.5 L water. Leave the floor to dry for at least 7-8 hours. The floor must be completely dry.
- Shake the container well before use.
- Apply approx. 1 dl of Maintenance Oil per 4 m² floor using a pad, short-bristled paint roller (3-4 mm) or a polishing machine with a white or beige pad on slightly larger areas.
- It is important that Maintenance Oil is carefully polished into the wood. Continue polishing until the wood appears saturated and the surface looks uniform.
- Wipe down the floor with clean, dry cotton cloths before proceeding with the next section of floor to be finished. The floor should not appear wet and there should not be any excess oil left on the surface after polishing.
- Continue stepwise till the floor has been finished.
- When polished with polishing machine the floor will be pre-hardened after 4 hours and may cautiously be taken into use. Manually polished floors may be taken into use after 24-48 hours. Do not expose the floor to water during hardening time of .
Do not clean the floor or expose it to water during the first 3 days, while the oil is curing.
Experience the convenience of swift order fulfillment with our top-notch Shipping services.